The ARRI WVT-1 Transmitter & WVR-1 & WVRs-1 Receiver Wireless Video Kit is an SDI-compatible, long-range, zero delay, wireless video system rated for a range of up to 2000’. Key features include:
Encrypted, uncompressed transmission w/ <1 ms delay
10-bit wireless video up to 1080p60 for HDR monitoring
Dual-channel audio, timecode, and REC flag metadata
1:1 wireless video kit w/ basic mounting hardware
ARRI Wireless Video System. The WVT-1 Transmitter & WVR-1 & WVRs-1 Receiver Wireless Video Kit is a professional-grade wireless video system comprised of proprietary hardware and software that has been fined tuned to meet ARRI’s stringent performance and quality standards. Please note, this kit is only compatible SDI-capable cameras and monitors.
Zero-Delay Wireless Video. The ARRI Wireless Video System transmits uncompressed 10-bit 1080p60 wireless video up to 2,000 feet and boasts less than 1ms of latency for real-time HDR monitoring that is always secured by 128bit AES encryption. The WVS utilizes Dynamic Frequency Selection technology that continually scans local airwaves and automatically selects frequency channels with low interference.
Expandable 1:1 Kit. This kit includes a single receiver and transmitter but supports multicasting to as many as four WVR-1 receivers from a single WVT-1. Pairing is easy using the dedicated buttons and on-board LED indicator lights communicate signal and network information without the need for an OSD.
Robust Build, . The WVR-1 and WVT-1 are housed in rugged aluminum that is both spray and dust resistant and all ports and antenna posts are collared to protect against damage during demanding production work. Both devices have built-in 1/4"-20 mounting insets and include additional hardware for mounting to ARRI standard 3/8"-16 support accessories and light stands.
Other Notable Features. In addition to the SDI input, the WVT-1 comes equipped with an SDI loop-out for on-camera monitoring. We’ve added a d-tap cable for powering from common power tap sources. The WVR-1 supports two simultaneous SDI output feeds via dual BNC connectors and can power compatible accessories from its 12V 2A 2-pin LEMO power output using the included accessory cable. We include an AC adapter for the receiver and a 24V 3-pin Fischer M-F cable for power and R/S control.